Clarke HSEC650A 2" 665W 290Lpm 9.5m Head Industrial Submersible Dirty Water Cutter Pump with Float Switch (230V) (Optionally available with Hose & Clip)
Clarke HSEC650A 2" 665W 290Lpm 9.5m Head Industrial Submersible Dirty Water Cutter Pump with Float Switch (230V)
Highlights
Clarke's truly heavy duty, industrial quality submersible dirty water cutter pump benefits from a corrosion resistant stainless steel drive shaft and body.
It also has a sharpened, tungsten carbide cutter plate to chop and reduce any water borne sewage or vegetation.
This enables the HSEC650A pump to happily pump dirty water, even sewage water, all day long and for cost-conscious, economic operation it’s also switched on and off automatically, thanks to the inclusion of a simple but effective float switch - as the water level rises this activates the pump, and turns it off once desired water level has been reached.
- Max. flow rate: 290 litre/min
- Max. head (lift height): 9.5m
- Can pump solids upto 15mm
- Robust cast iron base with filter
- Twin seals, TCT cutting plate & steel waste cutter
- Can pump small solids in suspension
- 665 Watts, 230V 1ph motor
- Includes 2" (50mm) outlet hose connector & 10m of H07RNF cable
Technical Details
Pumps Solids Up-to
15 mm
Outlet Diameter
2 "
Max Head
9.5 m
Volts
230 V
Max Flow
290 L/min
Float Switch
Yes
Watts
665 W
Other Features
Stainless Steel Body
Use
Clean/Dirty Water/Sewage
| Pumps Solids Up-to | 15 mm |
| Outlet Diameter | 2 " |
| Max Head | 9.5 m |
| Volts | 230 V |
| Max Flow | 290 L/min |
| Float Switch | Yes |
| Watts | 665 W |
| Other Features | Stainless Steel Body |
| Use | Clean/Dirty Water/Sewage |
Optional
1/ 2" Reinforced Hose (Per metre)
Highlights
Reinforced 2" diameter suction and delivery hose. Ideal for use with most kinds of mains electricity, petrol & diesel powered and PTO driven water pumps too. Reinforced hose can be used on both the suction and delivery sides of any surface mounted water pump, or the delivery side of a submersible pumps.
Please Note - The price quoted here is for a 1 metre length.
Hose is cut to length depending on your requirements. This hose is sold in a maximum continuous length of 30m. Every 30m of hose bought will be supplied separately and will need separately available couplers and clips to connect them together.
- The price quoted is for 1m in length
- Maximum single length of hose 30m
Technical Details
| Type | Reinforced |
| Diameter | 2 " |
2/ 2" Layflat Hose (Per metre)
2" diameter layflat water hose, perfect for use on the delivery (outlet) side of submersible, centrifugal and surface mounted water pumps. Lightweight layflat hose is easy to move, store and requires no real installation (other than unrolling and laying). Unobtrusive too, it lies flat to the ground when not in use but outlet water pressure is sufficient to open it up to deliver pumped water to exactly where it's required.
Please Note: -
Price quoted is for a 1 metre length. We cut the hose to the correct length to match your needs! This hose is sold in a maximum continuous length of 100m. Every 100m of hose bought will be supplied separately and will need couplers and clips to connect them together (sold separately)
Technical Details
| Type | Layflat |
| Diameter | 2 " |
3/ Hose Clip ( to suit above hose)Size Range Dia. (mm) : 50-70
PART NUMBER: 3070650
Size Range Dia. (mm) : 50-70
Technical Details
| Type | 3070650 |
| Diameter | 2 " 50-70 mm |
Warranty
Clarke is a British based company whose products comply with British and European Standards and European safety and CE marking directives. Their products are supplied with a 1 year parts and labour warranty from date of purchase.
